Force Global Ropex RES Technologie Resistance Engineered Sealing

Force Global Heatsealing Solutions

Temperature Controls and Components
for repeatable, precision controlled, heat sealing
and manipulation of heat sealable materials

PH: 414 507-9378 | www.heatsealbars.com | FX: 262 628-4451

Ropex RES Technologie Resistance Engineered Sealing
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background


PTFE Tape for Opposed Silicone Jaw/Bar Covering and Heat Seal Band Insulation Backing Enhancement:

Type
Thickness
mm (inch)
Ropex PTFE Tape
Specifications / Remarks
AP-08
0.08 (0.003)
Temperature stability:
up to 200°C
AP-13
0.13 (0.005)
Silicone adhesive thickness
approximately 0.05 mm
AP-15
0.15 (0.006)
Store in a cool dry place:
AP-25
0.25 (0.010)
Optimum storage temperature
20°C +/-5, humidity 45 to 75%
PTFE Tape = AP-15-15 (AP = Silicone Adhesive, 0.15 mm thick x 15.0 mm overall width)

Specifications & dimensions subject to change.

Ropex Heat Seal System Consumables:

PTFE coated glass fabric tapes are available in a range of in-stock sizes. We can also provide custom tapes, slit to your dimensions, to suit your application.

Apply PTFE tape to heat seal band backing insulation to enable the heat seal band to more freely expand, this will also prolong backing life and enhance insulation properties.

Tip: To improve adhesion and maintain tape location ... fasten PTFE tape in position with 25 mm wide masking tape (apply tape to bar sides only).

  • PTFE Tape - for opposed heat seal jaw/bar silicone covering.

  • Aids in holding opposed jaw bar silicone in position.

  • PTFE Tape - for Durit and heat seal band insulation enhancement.

  • For hard opposed jaw bar covering in heat seal and cut applications.

  • Adhesive backed for easy installation, heat resistant up to 200°C.

Ordering information:

PTFE Tapes ... In-stock (custom sizes also available)

  • Part No. 102305 (Used as a protective covering over heat seal band insulation backing materials when applied to the heat seal jaw bar).
    PTFE TAPE
    AP-15, Roll = 30 m
    15.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
    Adhesive Backed

  • Part No. 101414 (Used as a protective covering over heat seal band insulation backing materials when applied to the heat seal jaw bar).
    PTFE TAPE
    AP-15, Roll = 30 m
    19.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
    Adhesive Backed

  • Part No. 101415 (Used as a protective covering over silicone facing or Siglaha hard face insulation when applied to the opposed heat seal jaw bar).
    PTFE TAPE
    AP-15, Roll = 30 m
    40.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
    Adhesive Backed

  • Part No. 100892 (Used as a protective covering over silicone facing or Siglaha hard face insulation when applied to the opposed heat seal jaw bar).
    PTFE TAPE
    AP-15, Roll = 30 m
    45.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length)
    Adhesive Backed

Precision Heatsealing
and Packaging
Solutions
PH: 414 507-9378
FX: 262 628-4451

E-mail: info@forceglobal.com
Jaw Bar Consumables
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links