Clamp Bar-B with Silicone Insulation Backing:
Bar (B)
|
Step by Step Consumables Assembly Guide. |
Bill of Materials: |
 |
Step #1 |
Bar width = 19.0 mm (0.75") |
 |
Step #2
Apply silicone jaw bar facing insulation. This wiil compensate for irregular substrates and uneven heat sealing surfaces. |
Part No. 100030 Silicone Facing Durometer 30 Shore A Roll = 15 m Upper rounded edges 15.0 mm (Width) x 2.0 mm (Thickness) x 15 m (Length) Adhesive Backing |
 |
Step #3
Apply PTFE tape over silicone jaw bar facing insulation. |
Part No. 100892 PTFE TAPE AP-15, Roll = 30 m 45.0 mm (Width) x 0.15 mm (Thickness) x 30 m (Length) Adhesive Backed |
 |
Step #4
Optional ... apply masking tape to PTFE Tape sides to aid with adhesion. |
- |
This information is provided as a guide to illustrate some of the various heat seal bar configurations that are possible with components and consumables Force Global offer. |