PTFE Cover-Strip, for Maximum Heat Seal Band Performance and Life:
Type
|
Thickness mm (inch) |
 |
Specifications / Remarks |
AP-08 |
0.08 (0.003) |
Temperature stability: up to 200°C |
|
-
|
- |
Silicone adhesive thickness approximately 0.05 mm |
|
-
|
- |
Store in a cool dry place: |
|
-
|
- |
Optimum storage temperature 20°C +/-5, humidity 45 to 75% |
|
PTFE Tape = AP-08-CS-40-12 (AP = Silicone Adhesive, 0.08 mm thick, CS = Cover-Strip
40.0 mm overall width with a 12 mm non-adhesive free zone) |
|||
Specifications and dimensions subject to change.
ROPEX Heat Seal System Consumables:
PTFE Cover-Strip with a non-adhesive free zone enables the heat seal band to freely expand and contract, without damaging or creasing the covering glass fabric.
We can also provide custom tapes, slit to your dimensions, to suit your application.
PTFE Cover-Strip maximizes your heat seal band life. The heat seal band is free to expand and contract minimizing thermal and mechanical stresses.
Tip: To improve adhesion and maintain tape location ... fasten PTFE tape in position with 25 mm wide masking tape (apply tape to bar sides only).
-
PTFE Cover-Strip minimizes the thermal barrier between the heat seal band and heat sealable substrate.
-
PTFE Cover-Strip enables lower heat seal temperatures.
-
PTFE Cover-Strip promotes maximum heat transfer (heating and cooling).
-
Adhesive backed for easy installation, heat resistant up to 200°C.
Ordering information:
PTFE Cover-Strip Tapes ... In-stock (custom sizes also available)
-
Part No. 100733 (PTFE Heat Seal Band Cover-Strip, with adhesive free zone).
PTFE Cover-Strip
AP-08-CS, Roll = 30 m
40.0 mm (Width) x 0.08 mm (Thickness) x 30 m (Length)
12 mm Non-Adhesive Zone -
Part No. 101501 (PTFE Heat Seal Band Cover-Strip, with adhesive free zone).
PTFE Cover-Strip
AP-08-CS, Roll = 30 m
45.0 mm (Width) x 0.08 mm (Thickness) x 30 m (Length)
17 mm Non-Adhesive Zone