ROPEX RES-402 Resistron:

RES-402 | In-stock USA

The ROPEX Resistron RES-402 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-402 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

• Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

• Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

• Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

• Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

• Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

• 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-402 contains the following features:

ROPEX RES-402 Features:

• µC-Technology

• Automatic zero calibration, push button (AUTOCAL)

• Automatic optimization (AUTOTUNE)

• Automatic frequency adjustment

• Large current and voltage range

• Alarm function

• Temperature range 0...300°C

• Electrically isolated analog input for temperature set point selection
  with (PD) potentiometer or 0...10VDC

• Electrically isolated 0...10VDC analog output for ACTUAL temperature

• Automatic configuration of secondary voltage and current ranges
  (AUTORANGE, as of January 2006)

• 24VDC isolated control signals for START, AUTOCAL and RESET




RES-402 Operating Instructions:

ROPEX RES-402 Resistron Part Numbers:

Part numbers for 115, 230 and 400VAC units

• RES-402/115VAC Part No. 740201

• RES-402/230VAC Part No. 740202

• RES-402/400VAC Part No. 740203

• Alternate industry names for RES-402 controllers:

• RES-402, RES402, RES_402, res-402, res402, res_402

Upgrades:

• The RES 200 series has been replaced by the newer RES 400 series with micro-processor technology. The RES-402 replaces the now obsolete RES-207.

• Alternate industry names for RES-207 controllers:

• RES-207, RES207, RES_207, res-207, res207, res_207



RES-207 Upgrade Instructions:

ROPEX RES-402 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories and Modifications:

... available for the Ropex Resistron Heatseal Controllers:

• Current transformer: PEX-W3, PEX-W4

• Current transformer high busbar: HCB

• Line filter: LF-06480, LF-35480

• Booster: B-075400, B100400

• Temperature display, temperature meter: ATR-3, ATR-5

• Temperature adjustment, potentiometer : PD-3, PD-5

• Heatseal power transformer: PTR, TR-x

• Supervising fault current transformer: MSW

• Communication interface: CI-USB-1

• Temperature Sensor: TS-1

• Twisted Cable (RES voltage measurement cable): CI-USB-1

• High Current Cable (RES current load cables): C-TC