ROPEX RES-403 Resistron:

RES-403 | In-stock USA

The ROPEX Resistron RES-403 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-403 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

• Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

• Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

• Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

• Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

• Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

• 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-403 contains the following features:

ROPEX RES-403 Features:

• µC-Technology

• Automatic zero calibration, push button (AUTOCAL)

• Automatic optimization (AUTOTUNE)

• Automatic frequency adjustment

• Large current and voltage range

• Alarm function with fault diagnostics

• Selectable temperature range (0...300°C, 0...500°C)

• Temperature set point selection with (PD) potentiometer

• 0...10VDC analog output for ACTUAL temperature

• Temperature display using (ATR) temperature meter

• Activated with contact or 24VDC signal

• Automatic configuration of secondary voltage and current ranges
  (AUTORANGE, as of October 2005)

• Automatic phase angle compensation (AUTOCOMP, as of October 2005)

• Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)




RES-403 Operating Instructions:

ROPEX RES-403 Resistron Part Numbers:

Part numbers for 115, 230 and 400VAC units

• RES-403/115VAC Part No. 740301

• RES-403/230VAC Part No. 740302

• RES-403/400VAC Part No. 740303

• Alternate industry names for RES-403 controllers:

• RES-403, RES403, RES_403, res-403, res403, res_403

Upgrades:

• The RES 200 series has been replaced by the newer RES 400 series with micro-processor technology. The RES-403 replaces the now obsolete RES-203.

• Alternate industry names for RES-203 controllers:

• RES-203, RES203, RES_203, res-203, res203, res_203



RES-203 Upgrade Instructions:

ROPEX RES-403 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories and Modifications:

... available for the Ropex Resistron Heatseal Controllers:

• Current transformer: PEX-W3, PEX-W4

• Current transformer high busbar: HCB

• Line filter: LF-06480, LF-35480

• Booster: B-075400, B100400

• Temperature display, temperature meter: ATR-3, ATR-5

• Temperature adjustment, potentiometer : PD-3, PD-5

• Heatseal power transformer: PTR, TR-x

• Supervising fault current transformer: MSW

• Communication interface: CI-USB-1

• Temperature Sensor: TS-1

• Twisted Cable (RES voltage measurement cable): CI-USB-1

• High Current Cable (RES current load cables): C-TC