Force Global Impulse Heat Sealing Technologies and Solutons
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
RES Background

ROPEX RES-445 Resistron:

RES-445 | USA

The ROPEX Resistron RES-445 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-445 is designed for simple plug-in system integration.

The ROPEX Resistron RES-445 contains the following features:

ROPEX RES-445 Features:Ropex Resistron RES-445 Heat Seal Controller

  • µC-Technology

  • LC (green) or VF (blue)
    4 lines, 20-characters

  • Automatic zero calibration (AUTOCAL)

  • Automatic optimization (AUTOTUNE)

  • Automatic frequency adjustment

  • Large current and voltage range

  • Automatic configuration of secondary voltage and current ranges
    (AUTORANGE, as of software revision 100)

  • Automatic phase angle compensation
    (AUTOCOMP, as of software revision 100)

  • Booster terminal (MOD 26) as standard

  • Time control, for heat sealing time and cooling time settings

  • Preheating

  • Alarm function with fault diagnostics

  • Configurable relay output (e.g. "end of cycle")

  • Cooling controlled by time or temperature

  • Output for "set-value achieved"

  • Electrically isolated 0...10 VDC analog input for temperature set point selection

  • Electrically isolated 0...10 VDC analog output for ACTUAL temperature

  • 24 VDC isolated control signals for START, AUTOCAL and RESET

  • Selectable temperature range (0...300°C, 0...500°C)

  • Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)

  • RES-445 Operating Instructions:Ropex pdf

    For additional downloads, please visit ... or click here to add Ropex tab

ROPEX RES-445 Resistron Part Numbers:

Part numbers for RES-445- _  / _ VAC

  • RES-445-L/115: LC-Display, Line voltage. 115 VAC Part No. 744511

  • RES-445-L/230: LC-Display, Line voltage. 230 VAC Part No. 744512

  • RES-445-L/400: LC-Display, Line voltage. 400 VAC Part No. 744513

  • RES-445-V/115: VF-Display, Line voltage. 115 VAC Part No. 744521

  • RES-445-V/230: VF-Display, Line voltage. 230 VAC Part No. 744522

  • RES-445-V/400: VF-Display, Line voltage. 400 VAC Part No. 744523

  • Alternate industry names for RES-445 controllers:

    • RES-445, RES445, RES_445, res-445, res445, res_445

ROPEX Accessories:

... available for the Ropex Resistron Heatseal Controllers:


P: 414 507-9378


Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials